Board Variants
The ESP32-P4-WIFI6-DEV-KIT is available in four variants. All share the same core hardware — the ESP32-P4NRW32 processor with 32 MB stacked PSRAM, ESP32-C6 wireless co-processor, USB 2.0 OTG High-Speed, MIPI-CSI camera input, MIPI-DSI display output, audio subsystem, and all other onboard peripherals.
The variants differ in their connection configurations — which accessories are bundled or pre-connected.
Variant comparison
Section titled “Variant comparison”| Feature | Standard | -A | -B | -C |
|---|---|---|---|---|
| ESP32-P4NRW32 main MCU | Yes | Yes | Yes | Yes |
| ESP32-C6 co-processor | Yes | Yes | Yes | Yes |
| 32 MB PSRAM (stacked) | Yes | Yes | Yes | Yes |
| 16 MB NOR Flash | Yes | Yes | Yes | Yes |
| USB 2.0 OTG HS | Yes | Yes | Yes | Yes |
| MIPI-DSI display port | Yes | Yes | Yes | Yes |
| MIPI-CSI camera port | Yes | Yes | Yes | Yes |
| Audio (ES8311 + mic + speaker) | Yes | Yes | Yes | Yes |
| 100M Ethernet | Yes | Yes | Yes | Yes |
| 40-pin GPIO header | Yes | Yes | Yes | Yes |
| TF card slot | Yes | Yes | Yes | Yes |
Choosing a variant
Section titled “Choosing a variant”If you already have MIPI display panels, camera modules, and cables from other projects, the standard variant provides the bare board. The lettered variants (-A, -B, -C) bundle different combinations of accessories, saving you from sourcing compatible connectors and cables separately.
When ordering, check the Waveshare product page for each variant’s specific bundle contents, as these may change over time.
Variant information sourced from the Waveshare ESP32-P4-WIFI6-DEV-KIT Wiki.