Dual-Core RISC-V
High-performance 32-bit dual-core processor targeting 400 MHz, with a dedicated low-power core for always-on tasks. 32 MB stacked PSRAM and 16 MB flash.
ESP32-P4 WiFi 6 Dev Kit
Dual-core RISC-V at 400 MHz. WiFi 6 via ESP32-C6 co-processor. MIPI display and camera interfaces. Built for multimedia and edge computing.
A new class of ESP32
Section titled “A new class of ESP32”The ESP32-P4 is Espressif’s first application-class processor: a 32-bit dual-core RISC-V MCU designed for high-performance HMI, multimedia processing, and edge computing. The Waveshare ESP32-P4-WIFI6-DEV-KIT pairs it with an ESP32-C6 co-processor for wireless connectivity, delivering a complete development platform on a single board.
WiFi 6 and Bluetooth 5
ESP32-C6 co-processor connected via SDIO provides 802.11ax (WiFi 6) at 2.4 GHz and Bluetooth 5 Low Energy. No external modules required.
MIPI Display and Camera
2-lane MIPI-DSI output at up to 1.5 Gbps per lane for high-resolution displays. 2-lane MIPI-CSI input with integrated ISP and H.264 encoder at 1080p 30 fps.
USB 2.0 OTG High-Speed
Full USB 2.0 OTG at 480 Mbps with hardware-switchable HOST/DEVICE mode via onboard jumper. USB-A connector included.
Audio Subsystem
ES8311 codec, NS4150B amplifier, onboard SMD microphone, 3.5 mm headphone jack, and MX1.25 speaker connector. Ready for voice applications out of the box.
40-Pin GPIO Header
27 programmable GPIO pins exposed on a standard 40-pin header. Includes I2C, I3C, UART, and power rails for prototyping with external hardware.
More on board
Section titled “More on board”100M Ethernet
RJ45 jack with integrated magnetics for wired networking. PoE header available for power-over-Ethernet modules.
Expandable Storage
SDIO 3.0 TF card slot for high-speed removable storage alongside the 16 MB onboard flash.
Security
Digital signature peripheral and secure key management built into the ESP32-P4 silicon. Hardware-accelerated cryptographic operations.
Multiple Variants
Available in four configurations (standard, A, B, C) with different connection setups to match your project requirements.
Explore the documentation
Section titled “Explore the documentation” Introduction Architecture overview and key use cases for the ESP32-P4 dev kit.
Hardware Layout Board component map with all 24 labeled features.
Pinout Reference Complete 40-pin GPIO header pin-by-pin reference.
Demo Applications Pre-built demos for display, camera, audio, and WiFi.